Thinkleet.net: My Boredom = Your entertainment
geeking out & learning things

My boredom =
your entertainment

> Build logs from the bench. SDR, Meshtastic, LED panels, a homelab that keeps growing, and the occasional voided warranty.

// signal > trace > thought
Latest builds
cyan = RF · amber = fabrication
Life got in the way

Seven Years, One Heart Attack, and a Whole Lot of Solder

Seven years of silence, one heart attack, a marriage, a career change, and a travel habit. Catching up on everything that happened while the blog was dark.

02 Apr 2026 · 5 min read open →
Android

Using Ubuntu touch on a Nexus 5

Installing Ubuntu Touch on a Nexus 5 to use it as a portable RTL-SDR server. A walkthrough of what worked, what didn't, and whether it was worth the afternoon.

23 Apr 2019 · 5 min read open →
Linux

Loftek LK5200 as an rtl-sdr server

Turning a four-year-old Loftek LK5200 router into an RTL-SDR server by installing OpenWRT. Because why have a normal router when you can have a slightly cursed one.

28 Mar 2019 · 4 min read open →
Ham Radio

POCSAG on the Raspberry Pi

Decoding POCSAG pager traffic on a Raspberry Pi with an RTL-SDR, shortly after getting an amateur radio license. A general class ticket, a Pi, and way too much time on my hands.

26 Mar 2019 · 5 min read open →
Linux

BBS in 2019!? Say What?

Setting up a BBS in 2019 for no practical reason other than nostalgia and underemployment. A trip back to pre-internet networking with a modern twist.

25 Mar 2019 · 2 min read open →
3D Printer

Upgrading the ANET A8 with Ramps 1.4

When the Anet A8's stock mainboard gave up on one stepper driver, the obvious fix was to replace the entire board with a RAMPS 1.4. A walkthrough of the swap, the firmware, and the inevitable wiring mistakes.

28 Mar 2018 · 2 min read open →
Kodi

Hyperion+RetroPie+Kodi=Bliss!

Adding Hyperion ambilight LEDs to a RetroPie and Kodi setup on a Raspberry Pi. Blinky lights that actually respond to what's on screen, including SteamLink.

29 Dec 2017 · 2 min read open →
3D Printing

Squirrel Camera!

Building a motion-triggered squirrel cam with a Raspberry Pi after finding the porch pumpkins under attack. A quick project that mostly already existed and just needed assembling.

21 Dec 2017 · 4 min read open →
Media Center

Full setup of Retropie.

A complete walkthrough of setting up RetroPie on a Raspberry Pi 3, from image flashing to controller configuration, working entirely in Linux.

14 Dec 2017 · 7 min read open →